Vogel Egypt was established in 2019 as a full subsidiary of Vogel Systems, bringing German innovation and reliability to the Egyptian construction sector.
Vogel Egypt was established in 2019 as a full subsidiary of Vogel Systems, bringing German innovation and reliability to the Egyptian construction sector.
A single-component emulsion designed for the protection of concrete structures and can be applied by brush, roller, or spray. Estimated consumption is 0.13 kg/m2 as sealing layer and 0.2 kg/m2 as primer.
A ready-mixed filler suitable for common building surfaces that dries to a smooth but tough, crack-resistant, sandable finish. Can be painted, papered or stained, designed for indoor or outdoor repairs to plaster, plasterboard, brick, render, wood, stone and most other building materials.
A chemical admixture for waterproofing and protection of concrete, added to the concrete mix at the time of batching. The reaction generates a non-soluble crystalline formation throughout the pores that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.
A pre-blended, ready-to-use dry shake formulation for hardening freshly placed horizontal concrete slabs and toppings. It produces a hard, dense, wear-resistant surface that resists corrosion and absorption of grease, oils, alkalis and most chemicals, typically used in heavy-duty wear-resistant concrete floors.
A premium grade, low-viscosity dust-proofer and hardener specially formulated to chemically seal concrete and harden its surface. Two coats are recommended as guidance only and may vary depending on porosity, texture, substrate conditions and application method.
A monofilament polypropylene synthetic fiber mesh introduced in concrete to inhibit the formation of plastic shrinkage cracking. Estimated consumption is 20-30 kg/m3 for steel packs.
A glass synthetic fiber mesh introduced in concrete to inhibit the formation of plastic shrinkage cracking. Estimated consumption is 0.50 kg/m3.
A monofilament polypropylene synthetic fiber mesh introduced in concrete to inhibit the formation of plastic shrinkage cracking. Estimated consumption is 0.60 - 0.90 kg/m3.
A blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimizing water demand. The graded filler is designed to assist uniform mixing and produce a consistent grout.
A cementitious, pre-mixed, pre-packed chloride and hydrogen- free, high-flow, pourable grout containing cement, selected additives, and graded aggregates. Designed for excellent material flow properties, shrinkage compensation, frost resistance, and high compressive strength.
A cement-based one-component, ready-to-mix, high- performance, free-flowing and shrink-age compensated expanding grout. Ideal for filling voids and anchoring applications.
A water-based liquid admixture for mixing bonding slurries and improving physical properties of repair mortars and concretes. Once hardened, it improves abrasion and wearing resistance and reduces water absorption by capillarity.
An efficient highly emulsion that increases the efficiency of cement mortar such as repair mortar and floor lining resistant to corrosion and wear. Suitable for building mortar, plastering, whitewashing, concrete repair and restoration works, tile and ceramic adhesive mortar as a bonding mortar between new and old concrete.
A high-performance, one-pack, polymer-containing, water- resistant, premixed adhesive consisting of high-resistant cements and selected silicon/quartz mineral charges. Used as thin bed tile adhesive for permanent fixing of ceramic tiles.
A cement-based grout specifically formulated for filling tile joints on walls and floors. Made from carefully selected raw materials to ensure product consistency, it only requires water to be added on-site for use.
Provide a hard wearing, easily cleaned, attractive tile grout where high resistance to chemical attack is required.
A solvent-free, 3-component pourable grout based on high- strength epoxy resins and specially graded aggregates. Provides durable grouting solutions for demanding applications.
Relevant Identified Uses and Uses Advised Against
GHS Classification
Signal Word
Pictograms
Hazard Statements
Provides hard-wearing, easily cleaned, attractive tile grout where high resistance to chemical attack is required. Designed for demanding tile grouting applications.
A cement-based grout designed to point tile joints on walls and floors. Produced from carefully selected raw materials for consistency of product, requiring only the addition of water on site.
Relevant Identified Uses and Uses Advised Against
GHS Classification
Signal Word
Pictograms
Hazard Statements
A structural acrylic adhesive designed primarily for bonding rubber, ferrites, ceramics, wood, and some thermoplastics. Offers versatile performance capabilities for various structural bonding applications.
